Explanation of common problems in exporting n52 magnet techniques

Explanation of common problems in exporting n52 magnet: Iron and nickel are two types of magnet. Firstly, the magnet is a piece of magnet, followed by a permanent magnet and a third-generation rare earth magnet. A magnet refers to a strong magnet that has the ability to attract magnet shapes such as iron, nickel, and cobalt. Attach a clamp on the back panel to ensure stronger magnet are used for greater attraction.

In short, there are many types of magnet, including blanks, finished products, magnetic fields, substances, magnetic components, industrial or information, etc., depending on these aspects.

Processing customization: The manufacturing process of magnet includes the following steps.

Preparation of raw materials: Mix the required raw materials in a certain proportion and perform mechanical processing.

Powder metallurgy products mainly include the following key factors.

The customization process includes some key points: sintering, grinding, processing, and coating. These processes typically include the following steps.

Check if the formed magnet is allowed to operate on a daily basis.

Check whether the sintered magnet is allowed to be sintered in a harmless state, and whether there are fragments of tin and passivation.

● Check the sintered magnet: The coating of the sintered magnet is fragile, so it is necessary to clean the magnet before use to prevent delamination and damage.

Air cooling should not be carried out at the end of the smelting operation. Reasonably select the machine, the cooling conditions are relatively complex, and flushing should be avoided. Secondly, the operation should be scientific, and operation and poor operation are strictly prohibited.

Strong magnet manufacturers supply strong magnetic rollers to Qingdao Magnet Tianjin Magnet Qingdao Magnet Dongying Magnet Qingdao Magnet Factory.

What precautions should be taken when producing customized strong magnet? What precautions should be taken for the daily maintenance and upkeep of powerful magnet?

Traditional products are generally processed using 45 # or better magnetic steel, and there are two methods to compare: soft magnetic and hard magnetic rods.

Cutting magnet materials can not only process complex flat surfaces, but also produce different specifications of magnetic steel products by magnet manufacturers.

As a professional manufacturer of powerful magnet, Yutong Magnet has been widely used in various industries, vacuum, protection, communication, medical and other fields. If you need products similar to small specifications, please feel free to contact me at any time