Special attention points for packaging design of n52 magnet

Special attention points for the packaging design of n52 magnet!

Due to the inherent suction force of the magnet, its strong magnetic attraction may not be able to be placed, so it is necessary to have sufficient suction force to prevent the object from breaking or breaking.

If there are some drawbacks to the flat surface of the magnet, it can attract each other, but the edges and corners of that surface will be large, and some of the suction force is not suitable for slipping. Let's freely solve the problem below.

The magnet is too smooth or has some contact areas that may lack thorns, so it is necessary to use sufficient tools such as a large screwdriver to flip the surface. At this point, one magnet can become two.

Each type of magnet has an M Zibo, which is a magnetic king. Residual magnetism Br: permanent magnet; Coercive force Hc: Intrinsic coercive force, magnetic energy temperature resistance (80 ° C);

Temperature can be measured, so the temperature difference is also closely related to the magnetic properties of the magnet. If you do not display it or have other methods, it can be displayed.

● Can avoid cold magnetization: The magnetism of a magnet is temporary, and it may be due to its function. Once the Curie temperature is exceeded, the magnet will suddenly lose its magnetism.

Avoid mutual attraction and collision: magnet are prone to interference from external magnetic fields and corrosion. For some magnet, their magnetism often exhibits magnetism.

Magnetism refers to a magnet with a high magnetic energy product, but in high-temperature environments, its magnetic properties will significantly weaken.

magnet should be shielded during transportation under magnetization, especially during air transportation.

When operating the assembly, it is necessary to be careful to extract them one by one, to avoid mutual attraction, collision, and damage, and to prevent flying debris generated by the magnetic attraction and impact from entering the eyes, causing harm to the human body.

Due to insufficient magnetic force of the screen window, it cannot be automatically pried open, and communication and control cannot be carried out. During maintenance, the screen window cannot be opened. When reprocessing the screen window, it is necessary to use tools to make modifications.

Due to the low magnetic permeability of the screen window, the interference of magnetic permeability cannot be reduced. Additionally, due to the high temperature, static electricity will naturally be generated, resulting in a significant loss of electromagnetic wave energy absorption. 2. The anti opening rate of the screen window has been improved, and 3. The magnetic flux has also been reduced, which can effectively improve the anti spring opening rate of doors and windows.

Due to the low magnetic permeability of the screen window, it cannot meet the requirements of not achieving power frequency electromagnetic energy, and higher safety needs to be used